Lo Sal is a wall mounted High Capacity Reverse Osmosis System producing 30-35 Litres/Hr. of Pure drinking water from any Borewell / Brackish water source. Ideal for household purposes Drinking, Cooking, Laboratories, manufacturer, Factories & Hospitals. It is the most economical Reverse Osmosis system available today.
Features of LO SAL :
-
LO SAL employs four stage purification process to ensure you get pure drinking water.
Stage I : Activated Carbon Block Filter to remove suspended impurities like sand, silt, dirt, rust particles and organic matters.
Stage II : Granular Activated Carbon filter to remove harmful chemicals, smelt and residual chlorine.
Stage III : TFC Polyamide Reverse Osmosis Membrane Module to reduce dissolved salts by 90%. To remove organic matters, germs, bacteria, virus, compound metals and harmful minerals.
Stage IV : Bacteriostatic Silver impregnated Activated Carbon to prevent microbial growth at point of use. For colour removal and odour and restore water's natural taste.
-
LO SAL can also be attached to water coolers as an on-line water purifier.
-
LO SAL water purifier has superior elegant looks and color with long lasting durable components made from high performance engineering plastic to withstand high pressure and everyday usage.
-
LO SAL offers 2 year's pro-rata warranty on its Membrane module i.e. out of 24 months, if the membrane has to be replaced after 18 months, company will replace the same on collection of proportionate cost only and not of the entire 24 months. This gives value for Money.
-
LO SAL is designed to providing high recovery i.e. 50% thus reducing wastage of water.
-
LO SAL incorporates unique automatic Anti-scalant dosing to enhance Reverse Osmosis membrane life.
Product Specifications :
| Dimensions |
500(L) x 390(W) x 220(D) mm |
| Weight |
10.5 kgs approximately |
| Permeate Flow Rate |
35 litres per hour* ±10% |
| Concentrate Flow Rate |
40 litres per hour approximately |
| Single Pass Recovery |
50 ±5% (Approx) |
| Salt Rejection |
90 ± 5% (approx) |
| Electricals I/P |
230 V AC ± 10% |
| Power Consumption |
40 VA |
| Operating Pressure |
100 psig |
| Operating Temperature |
Maximum 40 °C |
Feed Water Conditions :
| Total Dissolved Solids |
Max 2000 ppm |
| Total Hardness |
Max 600 ppm |
| Suspended Solids |
Max 5 ppm at inlet |
| Turbidity |
<5 NTU |
| Iron |
<0.1 ppm |
| Free Chlorine |
<0.05 ppm |
| Oil And Grease |
Nil |
| Operating pH range |
4 - 10 |
| Temperature |
Maximum 40°C |
|